Frequently Asked Questions

San Tan Valley Concrete Pros works throughout San Tan Valley, AZ and the surrounding East Valley. If you're not sure whether your address falls inside our regular service radius, call us at 480-470-7046 and we'll confirm before scheduling a site visit.

Driveways, patios, sidewalks and walkways, stamped concrete, foundations and slabs, concrete repair and resurfacing, and commercial concrete work. If you can pour it, place it, finish it, or fix it, we likely do it — see the Services page for the full list.

Yes. We carry the licensing and liability coverage required to work residential and commercial concrete in Arizona. We're happy to share documentation before the project starts — just ask during the consultation.

Both. Residential work covers driveways, patios, walkways, pool decks, and home additions. Commercial work covers parking areas, sidewalks, ADA ramps, and slab work for new construction or remodels.

It starts with a phone call or quote request. We schedule a site visit, walk the project with you, measure, look at site conditions and drainage, and ask what you want the finished concrete to do. After the visit you get a written estimate with scope, materials, finish, and timeline.

A standard residential driveway or patio typically runs three to five working days on site — one day of demo and prep, one to two days of forming and pouring, then finishing and cleanup. Larger projects or jobs needing extensive grading take longer. We give you a project-specific schedule in the written estimate.

You can walk on most new concrete after 24–48 hours. For vehicle traffic on a new driveway, we ask you to wait at least seven days. Concrete continues to cure and gain strength for about 28 days after the pour — heavy loads should wait until then.

When a project requires a permit through Pinal County or your HOA, we'll let you know during the consultation and walk you through what's needed. For most replacement-in-place driveways and patios, no permit is required.

Yes. Demo, removal, and disposal of existing concrete is included in our standard scope unless we agree otherwise in writing.

Cost depends on square footage, thickness, finish, site prep, and whether there's existing concrete to remove. We publish a current pricing guide on the Pricing page and walk through the numbers for your specific project during the on-site estimate — no guessing from a screenshot.

Patio pricing depends on size, shape, finish (broom, smooth, exposed aggregate, or stamped), and access for equipment. Stamped patios cost more than plain broom finish because of the additional labor and materials. We'll give you a fixed written number after the site visit.

Yes. Site visits and written estimates are free. Call 480-470-7046 or request a quote through the form on the Contact page.

We accept cash, check, and major debit and credit cards. Payment terms — typically a deposit at scheduling and balance due at completion — are spelled out in the written estimate before any work begins.

Broom finish (the standard slip-resistant texture for driveways and walkways), smooth trowel finish, exposed aggregate, stamped concrete in a range of stone and tile patterns, and stained or color-integrated concrete. We'll bring samples to the consultation if finish is a decision point.

Broom finish is the textured surface you see on most driveways — slip-resistant and the most affordable. Exposed aggregate reveals the decorative rock in the mix for a pebbled look with good traction. Stamped concrete is pressed with patterned mats while wet to mimic flagstone, brick, slate, or tile, then sealed.

Stamped concrete delivers the look of natural stone or pavers at a lower installed cost than the real thing, with fewer joints for weeds to find. It holds up well in our dry climate, and the color and pattern options let you match the patio to your home's exterior. It's the most-requested upgrade on patio jobs.

Yes. Color can be added integrally during mixing, broadcast on the surface before finishing, or applied as a stain or dye after cure. We'll walk you through which option fits your finish and budget.

For routine cleaning, sweep regularly and rinse with a garden hose. For stains, a stiff-bristle brush with mild dish soap and warm water handles most household marks. Oil and rust stains may need a dedicated concrete cleaner. Power washing is fine on annual or semi-annual cycles — keep the nozzle moving and avoid prolonged dwell in one spot.

For stamped, stained, or exposed-aggregate finishes, yes — sealer protects the color and surface and is part of our standard finish on those installs. For plain broom-finish driveways, sealing is optional but extends life and resists oil staining. We can re-seal existing concrete on request.

Yes. Every project ships with a written workmanship warranty covering the install. Specific terms are spelled out in the project paperwork — ask during the consultation if warranty length or scope is a decision factor for you.

Most hairline and moderate cracks can be repaired without replacing the slab — we offer crack repair and resurfacing. If a slab has shifted, settled significantly, or shows widespread structural failure, replacement may be the better long-term call. The site visit tells us which is which.

Yes. San Tan Valley has a mild desert winter — most days are well within the working temperature range. On the cold mornings that do happen, we preheat water and aggregates, use accelerator admixtures to speed setting, cover fresh pours with insulating blankets to trap heat, and schedule pours during the warmest part of the day. Concrete hydration slows below 40°F, so we plan around it rather than fight it.

High temperatures and low humidity pull moisture out of fresh concrete fast, which can cause surface cracking if not managed. In summer we pour early in the morning, use retarders to slow set time, and keep the surface damp during initial cure. Hot-weather pours work — they just need different prep than cool-weather pours.

Fall hits the sweet spot — daytime highs are warm but not extreme, nights stay above freezing, and humidity is low. Curing conditions are close to ideal, and our schedule fills up accordingly. If you're flexible on timing, October and November are the easiest months to slot a project.

San Tan Valley soils mix sand and clay. Sandy soil drains but doesn't support well; clay expands when wet and shrinks when dry, moving anything sitting on top of it. Without proper subgrade prep, that movement shows up later as cracks, settling, and uneven surfaces. We compact the base, add gravel or crushed rock where needed, and detail drainage so water moves away from the slab — that prep is what makes a concrete install hold up for decades here.

Most premature cracking in San Tan Valley traces back to subgrade movement (the soil under the slab shifting) or drainage carrying water under the slab. A site evaluation tells us whether the slab can be repaired and stabilized or whether the underlying conditions need to be corrected first. Either way, the diagnosis comes before the fix.